3/4" CTS ID JG Twist & Lock Speedfit Slip Tee Connector

Note: A TSI28 Insert is required for heating applications (and recommended for plumbing applications) when making a connection to PEX (an insert is required for each end of the fitting being connected to PEX). This insert is sold separately. Slip tee connectors provide a simple method of breaking into branching off a rigid run without altering existing pipe work (Note: Tee installation kits do not have IAPMO or ICC approval). John Guest Speedfit Push-to-Connect Pipe Repair Slip Connectors provide a quick, simple, and inexpensive method of repairing burst or damaged pipe without the need to alter or add to existing pipe work. Usable on Copper, PEX, or CPVC pipe in any combination with no solder, glue, or tools required simply remove up to 2 inches of pipe and slide the connector into its place slip end first. No special skills are required and detailed installation instructions are included. JG Speedfit fittings use a collet with stainless steel teeth that grips the pipe when fully inserted, and an EPDM O-Ring to provide a permanent, leak-proof seal. When twisted into place, the locking cap locks the pipe in place and creates an audible click, ensuring maximum security. Disconnection is just as easy with no tools needed; simply twist the cap 1/4 in. turns counterclockwise to unlock then depress collet against the fitting to remove the pipe. Speedfit Twist-to-Lock fittings are suitable for hot and cold potable water and hydronic heating applications. Code approved for behind-the-wall installations. 25-Years warranty. Features JG Speedfit technology provides a reliable, leak-free connection Connects to copper, CPVC and PEX pipe in any combination Simple to use with no tools, torches or glue required Suitable for hot and cold potable water and hydronic heating applications Approved for behind-wall use 25-Years warranty Lead-free, Full flow, & UV Resistant Specifications: 150 psi @ 70°F 60 psi @ 140°F NOTE: Speedfit fittings cannot be used on stainless steel pipe. DO NOT USE FOR gas, fuel oil or compressed air applications.Hide Description