Blog

You know, plumbing systems are about more than just pipes. It’s all those fittings that really make things work—connecting, directing, and controlling water flow. If you're a pro plumber or just a DIY enthusiast, getting a grip on the different types of plumbing fittings is super important. The right fitting? It can save you from a leaky mess and those annoying, costly repairs later on.
Take elbows, for instance. They're one of the most common fittings out there. Elbows help change the flow direction—usually at 45 or 90-degree angles. You’ll find them in tight spots where straight pipes just don’t cut it, like under sinks or behind walls. They help pipes turn corners without a hitch.
And then there’s the tee fitting. It’s shaped like a “T” (hence the name!) and is all about splitting the water flow into two directions or bringing two flows together. You’ll see tees a lot in residential setups, where water needs to reach multiple places—think sinks, showers, and appliances.
Now, when you

Picking the right size for plumbing fittings can be a bit tricky, right? If you've ever found yourself scratching your head, wondering, "What size plumbing fitting do I need?", believe me, you’re definitely not alone. Messing this up can lead to leaks, bad water flow, or, worst case, a complete system breakdown. But hey, once you get the hang of a few basics, sizing isn’t all that hard!
First off, let’s clear this up: the size of your pipe and the size of your fitting have to match. Plumbing sizes are all about the inside diameter (ID) for flow and the outside diameter (OD) for compatibility, and it varies with different materials. For instance, a 1/2-inch copper pipe isn’t going to have the same outer diameter as a 1/2-inch PVC pipe. So, picking the right fitting type for the material is super important.
Here’s a quick rundown of common sizes you'll find in most homes:
- 1/2 inch – for sinks, faucets, and smaller fixtures
- 3/4 inch – used for the main water lines in homes
- 1 inch and

A leaking joint can really escalate into a bigger headache pretty quickly, but hey, that doesn’t mean you have to replace the whole line right away. So, if you’re looking to tackle that leak in your pipe joint, the first thing you want to do is figure out what’s causing it. Most leaks tend to spring up at the connection point. This can happen due to worn threads, loose fittings, damaged seals, or even corrosion that builds up over time. Plus, changes in temperature and water pressure can really weaken those joints, especially if the plumbing is older.
First things first, you need to shut off the water supply and dry the area really well. This helps you see exactly where the leak is coming from. If it’s a small leak and it’s from a threaded joint, you can give the fitting a gentle tighten with a wrench—but hey, don’t overdo it! Too much tightening can crack the fitting or mess up the threads, which just makes things worse. If tightening doesn’t do the trick, you’ll want to carefully take

When it comes to high-pressure systems, picking the right fittings isn’t just a good idea—it’s crucial for safety and long-term performance. You really don’t want to mess this up. The wrong fitting can give way under pressure, and that can lead to leaks, damage, and those annoying, expensive repairs.

So, let’s talk materials first. Brass fittings? They’re a solid choice for high-pressure situations because they resist corrosion and can handle stress pretty well over time. Then there’s stainless steel, which takes it up a notch with even more strength and durability. Perfect for those tough environments or commercial setups. Now, PVC fittings are pretty common in home plumbing, but you’ve got to make sure they meet the pressure ratings. If you’re working with higher pressures, go for Schedule 80 PVC instead of Schedule 40—it’s got thicker walls and can take more stress.

Now, onto pressure ratings. Each fitting is made to handle a specific amount of PSI (that’s pounds per square inch). You

So, you're on the hunt for plumbing fittings online, huh? If you’re ready to place that order, it’s good to know that not every supplier out there is created equal. Picking the right one? Well, that can save you a ton of time, keep things moving smoothly, and avoid those pesky delays. On the flip side, choosing the wrong supplier can end up costing you—both in cash and in headaches.
First off, let’s talk about availability. A supplier might boast a huge catalog, but if their items are always out of stock, what’s the point? You really want a supplier who keeps the essentials handy—especially those common sizes and those tricky parts that are hard to find.
Then there’s product selection. A solid supplier should have a broad range of fittings—think PVC, brass, stainless steel, reducers, couplings, adapters, the works. The more options they have, the fewer places you’ll have to shop around, which means less hassle and a smoother workflow for you.
Now, let’s not forget about shipping. Speed

You know, when folks think about plumbing distribution, beauty products probably aren’t the first thing that comes to mind. But honestly, they really should.

Take Madam C.J. Walker, for instance. She built one of the most impressive distribution networks in American history — and this was way before we had fancy logistics software or regional warehouses. It wasn’t just about the product she created; it was the whole system she put in place.

Walker didn’t just sit back and let things happen. Nope! She trained thousands of sales agents all over the country, giving them a sense of ownership, structure, and processes they could actually repeat. She got something really important that every plumbing supplier should keep in mind today: distribution isn’t just about moving products. It's also about building relationships, providing training, and ensuring a steady supply.

Her approach relied on local reps who really knew their communities, kept inventory on hand, and built trust through face-to-face

You know, the plumbing industry has always been about more than just tools and parts — it’s really about ownership, independence, and leaving a legacy behind. Nowadays, there’s this exciting wave of Black-owned plumbing supply houses and distribution companies that are taking that foundation and running with it, creating businesses that are built to stand the test of time.

Back in the day, it was tough to get access to unions, funding, and supplier networks. But today, we’re seeing a new breed of Black entrepreneurs stepping up in plumbing distribution. They’re not just contractors anymore; they’re becoming wholesalers, inventory managers, and regional suppliers. They’re out there negotiating directly with manufacturers, forming solid relationships with contractors, and using tech to give those big corporations a run for their money.

So, what’s different about this moment? Well, it's all about scale and strategy.

These businesses aren’t simply trying to get by — they’re thinking long-term.

At the dawn of the 20th century, America was grappling with a serious public health crisis. The rapid expansion of cities led to cramped neighborhoods, dirty water, and a slew of disease outbreaks. Cities were in desperate need of modern sewer systems and improved water infrastructure — and fast. What’s often overlooked is the crucial role that Black laborers played in this physically demanding and risky work, even though their contributions rarely got the recognition they deserved.

Picture this: digging trenches by hand, laying down miles of underground pipes, and constructing early drainage systems in bustling industrial towns. This wasn’t exactly glamorous work. It was hard, backbreaking labor that radically changed how people lived. Thanks to the expansion of sewer and water systems, the rates of cholera and typhoid plummeted, leading to significant improvements in urban health and life expectancy.

Unfortunately, many of these dedicated workers didn’t have access to the skilled trade

Long before we had social media marketing or those supply house credit lines, there were early Black master plumbers who built their businesses through hard work, immense skill, and just plain determination. Back in the day, union access was pretty limited — and a lot of times, it was just flat-out denied. So, many Black tradesmen faced a tough choice: give up or forge their own way. They chose to forge ahead.

Now, in the late 19th and early 20th centuries, licensing laws started to come into play, formalizing the plumbing trade. But, let’s be real, getting certified didn’t always mean you’d get a shot at opportunities. Since many were shut out from trade unions and contractor networks, a lot of Black plumbers took matters into their own hands and started independent businesses that catered to their communities. They were the ones repairing pipes, installing fixtures, and building water systems in neighborhoods that often flew under the radar of the bigger firms.

These were no small feats,

You know, when we turn on a faucet, flush the toilet, or just trust that the water from our taps is safe to drink, we often forget about the brilliant minds who created the systems that make all of this possible. With Black History Month here, it’s a great time to shine a light on some of the Black inventors who might not get the recognition they deserve — their mechanical genius has really shaped sanitation, water flow, and safety in America.

Let’s talk about Lewis Howard Latimer for a second. Sure, he’s mostly known for his work with improving the light bulb, but he did so much more than that. His engineering drawings and drafting skills played a huge role in standardizing technical designs that influenced infrastructure development. Think about it — he made complex systems easier to replicate and scale, laying down the groundwork for modern building standards we take for granted today.

And then there’s Thomas Elkins. This guy patented some pretty significant improvements to refrigeration